- Buy Live, Push, Max for Live and Ableton merchandise | Ableton
Most people looking for Ableton live lite windows 10 downloaded: Ableton Live Lite. Download. on votes. Included with a number of apps and hardware products, Live 10 Lite is a lightweight version of Ableton Live Ableton Live. Download. on 52 votes. Mar 04, · The fix was a driver conflict with an Audio Controller (System Devices). Try disabling yours, reboot, plug in your midi device, and check if midi in/out is detected. If that worked, double check you have the latest installed and actually chosen (installing the driver doesn't always choose it). 4 posts • Page 1 of 1. Ableton (Trial version) User rating. Download. 1/6. Ableton Live 10, released in February , can stylishly take on many musical tasks. The software music sequencer and digital audio workstation is compatible with Windows and Mac and is the latest major release of Live. As well as being used for mixing, recording, composing and.
- Ableton windows 10
Link two or more tracks to edit their content simultaneously. This makes editing multi-tracked instruments or performances with multiple musicians easy and fast whilst keeping everything in time across tracks. This feature also works for MIDI tracks. Plug in your MPE-capable controller and immediately add bends, slides and pressure for each individual note in a chord. Add subtle expression variations, morph between chords and create evolving sonic textures.
This way of using MIDI allows MPE-capable devices to control multiple parameters of every note in real time for more expressive instrumental performances. Edit the pitch, slide and pressure envelopes of each note to refine the expression of your takes.
Or take your sound design further by sequencing polyphonic sound variations. And Live comes with MPE presets for each device that bring new dimensions of interaction and playability to your sound. The new expressive possibilities also enable polyphonic aftertouch on Push. Hybrid Reverb combines convolution and algorithmic reverbs.
Place your sounds in any space, from accurate real-life environments to those that defy physical reality. Use the algorithmic side to add control and modulate the reverb tail, run it in parallel or in series with the convolution side, or play Hybrid Reverb like an instrument for real-time sound design. Breaks the spectrum of an incoming audio signal into partials, then stretches, shifts and blurs the result by a frequency or a note in subtle or radical ways.
The MIDI sidechain input also allows musicians to process material in key and even play the device as if it were a polyphonic instrument. Select a sound to hear it with various Spectral Resonator presets:.
Transforms sound into partials and feeds them into a frequency-based delay, resulting in metallic echoes, frequency-shifted and reverb-like effects. The Freeze function captures and holds a slice of audio — either free-running or in time with the beat — for stuttered, glitched and washed-out effects. Create jittery glitch effects, delayed digital shimmers and outlandish vibrato with this Max for Live pitch shifting device created in collaboration with Robert Henke and inspired by the Publison DHM 89 — an early digital effects processor.
Six playful instruments and effects created in collaboration with Dillon Bastan that use natural and physical processes as their inspiration. Vector FM — Manipulate different combinations of FM oscillators represented by moving particles — play with movement and voices to create evolving modulations and textures. Vector Grain — A granular looper that visualizes sound modulation by moving particles on the interface — play with attraction and magnetism or loop the particles through a flow field.
Vector Delay — Each visualized particle in this multitap delay device represents a different delay line — create pitch shifting or reverse delay effects with movement controlled by physical forces. Emit — This visual granular synthesizer uses particles shooting across a spectrogram to show the grain of a sample being played, while vertical movements represent filtering and panning.
Tree Tone — Grow different fractal patterns inspired by plants, then use them as resonators for internally generated noise or incoming audio. Bouncy Notes — Bounce balls up and down a piano roll to create pitch shifting delay effects or arpeggiation with this gravity-based MIDI sequencer. A producer and drummer duo show tempo following and Macro improvements in action.
Live listens to and adjusts its tempo based on incoming audio in real time, making it a dynamic part of the band instead of the tempo source that everyone has to follow. Store the state of your Macros for later recall — perfect for creating instant variations to your sounds or builds and drops during performance. Configure your Racks to have between 1 and 16 Macros. Randomize the state of your Macros with the randomization button.
How do I authorize Live 11 Lite? Am I eligible for a free Live 11 Lite upgrade? What are the system requirements? Mac OS X Play video: Session View. Session View. Play video: Arrangement View. Arrangement View. Max Authorization Window: improved wording and user options.
Performing an Undo after Macro-mapping a Max parameter would leave that parameter unmapped and unusable. Live would crash when dragging a Live device on top of a Max for Live device. Mapping Device Rack Macros to a live. MIDI editor When folding an empty MIDI clip in a Drum Rack that contained at least one chain receiving all notes, the clip would fold to that chain only, whereas now the clip will not fold at all. Also, when switching between audio clips while a warp marker was selected, the Seg.
BPM box would erroneously show the tempo of the previously selected marker. This would also lead to jumps in the displayed waveform visualization when the tempo was adjusted. In a multi-clip editing scenario, notes of all clips are taken into account, whereas previously only the notes of the foreground clip were considered. Additionally, fixed a bug which prevented the vertical zoom state from initializing correctly under certain circumstances.
Fixed a few minor bugs in the MIDI Editor: when selecting one out of many selected notes, the selection would not revert to the selected note when opening the context menu while hovering over a background note, and then clicking outside of the context menu, the background note would remain in a hovered state when hovering over a background note, it was possible to highlight a momentarily invisible foreground note Multi Clip Editing Previously, the adaptive grid size of a newly created clip could sometimes be incorrectly calculated when multi-clip editing.
Navigation Tracks in the Arrangement View would scroll out of view completely when toggling Automation Mode if the highlighted track was not visible. When resizing an Arrangement track, only tracks whose header is selected will be resized. Previously, a track might be erroneously resized if a content selection existed on that track.
When scrolling up and down in the Arrangement View using a mousewheel, the view would only move in very small increments. Previously, when extracting a Drum Rack chain to a new track, the zoom level and time selection were erroneously applied to the newly created clip. When undoing the deletion of a note while in Arrangement View, the Clip View zoom level unexpectedly zoomed in to that note. Previously, scrolling the Arrangement's mixer section with a mousewheel was not possible.
Previously, the time selection status display would not get updated when selecting a clip in the Arrangement. The grid modifier would not toggle the grid when changing the time selection or moving the insert marker with the arrow keys.
Dragging a device over a Session return track header that overlapped a group device chain header would cause erratic scrolling in Session View. Nested Groups Fixed a crash that occurred when duplicating a nested Group Track containing a plug-in with an active modal dialog while Live's second window was open.
New Devices and Device Improvements The Arpeggiator device could lead to crashes under certain circumstances. AU plug-in parameters might behave erratically when being controlled with the mouse, under certain circumstances. It was erroneously possible to tweak parameters in the expanded view of certain devices, even if the track was frozen. Under certain circumstances, some Wavetable and Echo parameters would not respond smoothly.
Simpler's settings would not be recalled correctly, if the device was set to Slice by Beat and its playback was not warped. Echo's timing would change when exporting audio at a different sample rate than the one currently in use. Under certain circumstances, Wavetable's polyphonic voice stealing would cause certain notes to get stuck. A crash might occur when trying to preview a Live Clip in Live's browser, if this referenced a Wavetable device.
The switches on the left side of the Glue Compressor device are now centered. Certain parameter names would be truncated in the left column of Wavetable's Modulation Matrix. Dropping many samples onto a Simpler or a Drum Rack would take much longer in Live 10 than it did in Live 9. Live could crash when loading certain Wavetable presets from the Core Library.
Setup Fixed a bug which caused a "Preferences. Fixed a crash which occurred on startup under certain circumstances. On certain Windows machines, attempting to authorize Live 10 would fail. Live was not able to prevent entering Sleep mode or turning off the display on Windows.
Wavetable The animated sliders beneath the modulation target names would occasionally not appear in Wavetable. Improved Wavetable's impact on CPU under certain circumstances. Changes for Push: Push Improved the display of Live's color palette on third-party control surfaces. Updated Push 2's firmware to version 1.
This version contains the updated color palette for Live Envelope visualizations are now available for Wavetable on Push 2. It is now possible to select wavetables in the Wavetable device on Push 1. Push bugfixes: Push The clip color palette for Push 1 was updated to match the Live 10 color palette. The Push 1 browser would not display entries correctly if Live's language was set to Japanese.
Fixed parameter sensitivities for Analog and Impulse devices on Push 2. Push Device Visualization Wavetable's filter visualization on Push 2 might be displayed incorrectly after the Control Surface script was reinitialized. A device's color would not update correctly on Push 2 when moving the device to a new track. Push 2's display failed to indicate that an automation existed for certain Wavetable filter parameters. Fixed envelope slope visualizations in Wavetable on Push 2. Added missing parameters and icons for Operator and Analog's parameter banks on Push 2.
Fixed a scenario where Push 2's display could crash when hot-swapping AU plug-in presets. The Note Settings view would close after touching an encoder, if all notes were being edited Push 1 and Push 2. It is now possible to copy, paste, duplicate and nudge a time selection that spans across automation lanes in multiple tracks. When an Arrangement selection resides on an automation lane, the text for nudging changes from "Nudge Clip s " to "Nudge Envelope s ".
While dragging MIDI clips, notes are drawn in the range of the target track. This enables seeing the content of the clips in the context of the target track.
Automation It is now possible to extend a selection from an automation lane to the content lane of the same track. Introduced a "micro-snapping" behavior: clips, loop markers and warp markers snap to a grid line even if the grid is off, if the distance to that grid line does not exceed 1 pixel.
Browser It is now possible to add Factory Packs content to Collections. Capture Capture can now change the Set tempo, if a preferable interpretation is found. When overdubbing a loop in the Session View, Capture will choose the loop iteration with a significant amount of new material in it. This is achieved via a context menu by right-clicking on the plug-in device either in the browser or in the Detail View. If the setting is disabled, the plug-in will appear much smaller in size, but this helps in cases where the mouse would behave erratically when trying to interact with the plug-in UI.
Improved the zoom cursor design to increase its visibility with all Themes. When dropping a sample on a Drum Rack pad, its border now appears in black or white instead of orange , depending on the Theme in use. Improved the 'Live 9' Theme. When editing multiple clips while zoomed out of the MIDI Editor, notes are now displayed in a shaded version of their clip color, so it is easier to identify to which clip they belong to.
The color of the little ticks that indicate a boundary between two very small notes has also been adjusted to improve readability. Finally, in order to make high-precision note editing easier, notes are no longer displayed as selected when they are being controlled by the mouse e.
Level meter ticks now match the color of the dB labels beside them. Changed the width of tracks created by dragging and dropping something into Live. Updated the Mid-Dark and Dark Themes. Added minor color changes to Automation Mode. The Solo buttons have been updated to fit the new font.
Improved the appearance of the Solo button icons. Minor improvements to the title bar of the multi-clip editor. Updated Ableton Sans Font: enabled use of additional diacritical marks, and correctly positioned them at the height of lower-case characters. Increased the opacity of the clip content in Automation Mode. Live support exchanging SysEx messages with Max. Mixing The number of audio-in buses for plug-ins has been increased to a total of eight inputs. Multi Clip Editing Improved the behavior of the Fold button when editing multiple clips at the same time.
Scrubbing in MIDI Clips now works when multi-clip editing: - Scrubbing in the Session View will play the clips as if they had been started at the same time, i. If the current selection contains several clips from the same track, clips will be chosen from each track in the following order: foreground clip, playing clip, triggered clip, first clip of the track. Scrubbing is currently disabled if one of the clips is frozen. Note: the trigger line that shows where the clip s would start during the trigger state does not yet support multiple clips.
This will be addressed in the future. Additional bugfixes: - Previously, the freeze layer on top of the scrub area was not shown for frozen MIDI clips. Improved the behavior of the Fold button when editing multiple clips at the same time. Navigation Audio tracks will be automatically named by the clips that are added onto them. If there is a single session or arrangement clip in a track, then the name of the track will follow the name of that clip.
If more clips are added, the track will stick with whatever name it got when there was only one clip. If all clips are removed from the track, the track will return to its default name. Refined zooming behavior in the Arrangement, to avoid scenarios where the view would jump to the middle of a selection if only one edge of the selection was currently visible. Follow is now paused while breakpoints are created. Additionally, when replacing a sample already loaded into Simpler, the new sample will retain all the Warp and Loop settings.
Added performance improvements to Wavetable and Echo. Real-time modulation signals are now visible at the top of Wavetable's Modulation Matrix. Reduced the memory footprint of Wavetable. Also reduced occurrences of clicks in the audio when stealing voices. Macro-mapped controls in Wavetable now appear in the Modulation Matrix.
Improved Wavetable's LFO display to make the visualization smoother and more consistent. Wavetable's Modulation Matrix headers are now clickable, allowing to jump to the respective modulation source panel.
This reduces energy use and heat, and improves battery life. Copying an Arrangement clip in Session View could create additional unwanted Session clips, under certain circumstances. Live would crash when loading a Live Set, if one of the tracks contained very short clips, and at least one clip was set to "Master" tempo in the Arrangement.
The Segment BPM box is now only editable when a single warp marker is selected. Also, when an audio clip's Warp switch is activated, or when an audio clip is selected, the first warp marker is now selected and the box is consequently editable. Nudging selected material in the Arrangement might lead to unexpected results, when entering or exiting Automation Mode after creating a selection.
When deleting part of a clip within a fade-in, the fade-in no longer spans the empty space. Fixed a crash that occurred when copying a time selection on a track containing Send automation, under certain circumstances.
Nudging clips in the Arrangement was not possible when the time selection was made by dragging from right to left.
When nudging a selection on an automation lane, the automation would be copied instead than moved. When dragging transient markers with the Shift modifier pressed, the transient markers would be deleted instead of moved. Live would crash when moving at least three clips under certain circumstances. Bugfixes for time selection in Detail View for MIDI clips: when clicking the time selection header with an expanded time selection, the time selection would be lost.
Fixed a bug which prevented nudging Arrangement clips correctly, under certain conditions. Additionally, undoing the deletion of a clip could prevent the time selection from being restored. Live could crash when copying a frozen clip from Arrangement View to Session View. Additionally, it is now possible to drag frozen clips from Arrangement View to Session View. Live could crash when extending the Arrangement Loop to very large time values. The clip content of the content lane and the main automation lane would visually "jump" by a small amount when toggling Automation Mode.
Moving a non-quantized Warp Marker via arrow keys did not work at certain zoom levels. Immediately dragging a Warp Marker after its creation would not work, if the Warp Marker was not created on the top of a transient marker. The grid modifier was not working when dragging immediately after the creation of a Warp marker.
Adjusting multiple clip Gain settings at once would take an unusually long time. Automation Live would crash when importing a track with Send automation into a Set containing no return tracks. Fixed a bug that affected content selection behavior in the Arrangement, in cases where a previously existing parameter was removed by e. Arrangement automation is no longer lost when duplicating a device using the Duplicate command. Clips no longer lose their MIDI controller or warping parameter modulation envelopes when dragged to a different track in the Arrangement.
Copying, pasting and nudging a non-contiguous selection in automation lanes for multiple tracks could lead to erratic results. Fixed the shape of the right-most automation segment's active mouse area.
On Windows, automation curve editing is now only possible if the modifier was already pressed at the time of the mouse-down, to avoid disabling the grid instead. When moving the fade-in end past the fade-out start and then back within the same mouse gesture, the fade-out start would not be restored to its prior length. Moving the fade-in start could affect the fade-out start even though they were not touching.
An unexpected fade-in would erroneously appear after removing a crossfade from two crossfading clips. Unwanted time signature automation would be created when duplicating time, if the time selection was not aligned to bar boundaries. The Automation Mode "A" shortcut key toggle was not mentioned in the respective menu entry.
A wrong grid quantization was applied when creating breakpoints in proximity of a breakpoint segment while the grid was set to "Off". Added various improvements for adding and editing automation breakpoints. Glue Compressor's "Release" parameter. Automation lanes would not be deselected after folding a track and creating a selection in a different track. When selecting the automation lane in a nested track, the Group Track's automation lane would erroneously retain the selection, if this previously existed.
It is now possible to drag an automation lane time selection to the content lane of any track. Previously, this was restricted to the same track. Browser When one of the the Packs folders was favored, browsing its sub-folders via Collections might display the wrong content. Live would crash when trying to relocate a missing user folder in the browser, if the user folder was the root of a drive. When selecting an audio file in the browser, the wrong file would be previewed if a sample with the same name was previously selected.
Folders listed under Collections labels could exclusively be sorted by name. The browser color labels would not update correctly in some situations. When displaying the second browser column, this appeared empty until its label was clicked once. Capture When overdubbing in Session View, only one loop iteration is created before the new captured material. File Handling Live would crash when restoring a Live Set after a crash, in cases where the Live set had been saved after undoing a manoeuvre.
A crash would occur when adding a folder to Places, if the folder name contained an emoji character. Under certain circumstances, recovering a Live Set after a crash was not possible. Live could crash during a crash recovery under certain circumstances. Live could crash when loading a clip under certain circumstances. Changes to the Global Launch Quantization were not undoable when applied via the 'Options' menu. Live would crash when an AU plug-in instance which couldn't be loaded was removed from a Set.
The indexer process could crash on OS X when saving songs,if their filename contained slashes. Also, fixed a bug that caused the loading of a lesson accompanying a Live Set to fail, if the song had a slash in its file name. Live would crash during a Live Set recovery, if the original file name contained certain caracters. Improved the logic in the mechanism for importing MIDI files in Live, which previously could lead to unexpected results.
If an audio file's name contained certain characters, those characters would not be correctly displayed when importing the file in Live. When undoing an action after Saving a set, saving the Set again was not possible. Increased the preloaded sample file regions for warped samples in Simpler, in order to prevent sporadic drop-outs.
The Undo history would be compromised in cases where the Max installation could not be found, or Max could not be started. Furthermore, Live would endlessly attempt to load referenced patches, when Max was not available. Solved an issue where drop-down menus might appear misplaced on Windows, in multi-monitor configurations. Items in the Global Quantization drop-down menu would not be highlighted when hovering with the mouse.
Improved the handling of multiple program windows on Windows. Previously, Live occasionally prevented bringing other programs to the foreground. Improved the responsiveness of interactions in the Arrangement UI e. In the Session View, clip envelope modulation was displayed in the wrong color. FIxed a bug which, under certain circumstances, might cause certain UI elements to disappear.
Adjusted a visual inconsistency in the gap between the meters and devices. Previously, the cursor would inadvertently move away when clicking in the beat-time ruler, if Follow was active. Improved the readability of the text that appears in a plug-in device when the device is not available, when the Mid-Dark and Dark Themes are in use. When performing a drag and drop of a track into a Group Track in the Session View, the vertical drop indicator would not be displayed correctly.
The resize mouse cursor would not be shown in the Arrangement Overview, under certain conditions. Scrolling in the Arrangement might lag severely on Windows, under certain circumstances. Animations and meters would temporarily freeze during mouse movements, under certain conditions. Applied a lighter color to the Electric device so that the parameter labels are readable in all Themes.
It was not possible to input alternate characters from the character candidate window on OS X, when renaming items in Live. The height of default MIDI and audio tracks and tracks created by dropping devices is now the same. Added minor visual improvements to the Mapping Browser.
The background color of the "Arrangement Position" field in the Control Bar was displayed incorrectly when Link or the Metronome count-in were enabled. The text for the Tension device's toggle buttons would fail to appear when using a Dark Theme. When a Dark Theme was in use, selected Rack Chains might fail to display certain icons. When a non-contiguous selection exists in the Arrangement, no selection color is visible in the gaps between two non-selected tracks anymore.
Adjusted the width of the clip preview in Session View while performing a drag and drop action. Fixed a bug which could cause the text in the Help View to be truncated by the scrollbar. The values of small parameter dials would change color upon selection, if the Dark Theme was in use. The Group Track icon would clash with the track name in Session View, if the track was resized to the smallest possible width.
The track title text in Session View would change its color automatically when resized to the shortest width, if the Mid Dark Theme was in use. Adjusted the text color in the Preferences, so that it looks correct in all Themes. On Windows, the size and position of the second window would not be remembered when closing and opening it again.
On Windows, Live's windows and dialogs would occasionally flash briefly when appearing on screen. Fixed the selection color for rows within the 'Groove Pool'. Corrected the text color for minimized track headers. The color of a Default Track set in Live 9 now correctly translates in Live When dragging a clip with a long name containing a Rack into an empty track, or when pasting it into an empty track, the track title in the Session View would overlap with the Chain Mixer 'Fold' button.
The Arrangement Group Track header drop marker was drawn one pixel too far to the left. When the peak meter is lit, the peak meter text is now visible in the Dark Theme. Active Grooves displayed a wrong text color in the first field of the Groove Pool, if the Dark Theme was in use. Changed the text color for all status bar alerts, to increase its readability when using the Dark Theme.
Max for Live improvements Fixed a bug in the Drum Synths which prevented the correct decay value from being used, if this updated at the same time that a note message was sent. It is now possible to finely adjust Max for Live device parameters using the "Shift" modifier, as for all other Live devices. Max for Live devices would steal the keyboard focus from Live's UI. Removed the "defaults" Object Defaults menu from the Options menu on Windows. Fixed a bug which caused focus rectangles to go missing.
Fixed adjusting sizes of boxes upon loading. When multi-clip editing, it was erroneously possible to select and edit notes in a frozen background clip. Navigation When renaming an item in Live, the cursor would end in the wrong position if the text was selected and one of the arrow keys was pressed. Auto-zoom no longer occurs in the Detail View when moving the clip loop using the arrow keys. Follow is temporarily disabled during scrubbing. This also fixes a bug where, if Follow was active, changing the clip's play position might lead to unexpected results.
Follow would not be paused when adjusting fade handles. After a user interaction paused Follow, it was necessary to click the Follow button twice in order to re-enable it. Live would crash when a Group Track was duplicated, if it contained a VST plug-in which opens a dialog whenever duplicated e. Dragging older uncolored Sets from the browser into an existing Session might lead to a crash. Coping and pasting multiple clips at once could lead to unexpected results if some of the clips originated from nested Group Tracks.
In some cases, pasted clips would end up in the wrong target track, if the copied selection was across nested Group Tracks. New Devices and Device Improvements Live would crash when moving or grouping a track containing Wavetable, if Push 2 was in use and Device Mode was displayed. Moving parameters in a device could lead to some tiny noise bursts if the device was processed by Drum Buss. The text in the Reverb device's Decay Time field would not fit in some cases.
Audio artefacts would affect Wavetable when modulating its parameters via Aftertouch or Mod Wheel. Previously, it was not possible to map Wavetable parameters to Macros from the device's expanded view. Wavetable now supports sustain pedals. Added various UI improvements to Wavetable. Under certain circumstances, the Wavetable's Filter Drive slider would have no effect.
Addtionally, Wavetable's 'Glide' parameter would not work as expected. Live could crash when hot-swapping the Wavetable device, if the device was inside an Instrument Rack. After changing the language in the Preferences and changing it back to the initial language, Live would revert to the first language chosen upon program launch, instead of the last language chosen.
Added a debug option to Live 10 which allows restricting the maximum number of real-time audio threads when Live is running in ReWire slave mode, to prevent performance issues when Live is running as ReWire slave with certain DAWs on Windows, if a CPU with 16 or more cores is in use.
This can be enabled via the following debug option in the Options. This will force Live to run its audio engine in single-threaded mode when running as a ReWire slave.
If Live is running standalone i. Fixed a regression which caused number input boxes to steal all keyboard input once touched , and thus preventing the MIDI keyboard, normal single letter shortcuts, etc.
Numbers typed into number input boxes would not overwrite existing values, but only insert new digits, and it was possible to edit unsupported characters into number boxes. Fixed minor typos in info text translations. A memory leak might occur when certain previously available plug-ins were not allowed to launch e. An unusually high CPU usage would occur if a Live Set made use of several plug-ins whose parameters were configured in Live.
The name of the undo action when importing MIDI and audio files was wrong. Additionally, it is now possible to import MIDI and audio files when the selection is on an automation lane. Added a filter visualization for Auto Filter on Push 2. Added a visualization to Operator's Filter bank on Push 2. Introduced additional icons to the Global bank for Wavetable on Push 2.
Updated Wavetable's Unison Mode icons on Push 2. Updated the Push 2 color palette. On Push 2's display, "On" and "Off" values now appear in title case instead of uppercase. It is now possible to control Wavetable's Poly Voices parameter from Push. Improved the look of Operator's 'Algorithm' icons on Push 2.
Improved the way filter curves appear on Push, by drawing an opaque background. Push Note Layouts On Push 2, the state of a track e. The routing position chooser on Push 2 would not indicate the correct position. Deleting a track in a nested Group Track from Push would not work under certain circumstances. It was not possible to add a track with Push, if the currently selected track was frozen.
Occasionally, it was not possible to leave note settings or step automation modes on Push 2. Additionally, it was not possible to step-automate the Semi parameter from Push.
The Push display process would use an unusual high amount of CPU when idling, which could occasionally lead to the laptop fan to kick in as soon as Push 2 initialized.
When switching from Filter 1 to Filter 2 in Wavetable's Filter bank from Push 2, Filter 1's filter circuit would still be shown if the highpass filter type was selected. Under certain circumstances, a device might erroneously appear disabled on Push 2. It was previously not possible to reset Wavetable's Oscillator Transpose parameters to their default value by holding the Delete button and tapping the encoder on Push 2.
It was not possible to reset Wavetable's modulation amounts from Push. When a clip's loop position was changed from Push, the change was not reflected in Live's UI. Notes in a track containing a Drum Rack were displayed in the wrong color on Push 2's display. On Push 2, Clip Mode's zoom overview occasionally did not include the entire region, and the playhead would fail to appear when an audio clip contained a section without any sample content.
It was not possible to delete the notes of a sequencer page in Slicing Mode on Push 1 and 2. The sequencer or loop selector pads would erroneously send mono-aftertouch or poly pressure messages. In the Arrangement, the "Reverse" command can now be performed on a time selection via the new "R" shortcut key. Also fixed a bug related to reversing samples. When using Reverse on a partially-selected clip in Arrangement, only the selected part is reversed.
It is now possible to deactivate, reverse and crop selected material within a time selection on an automation lane.
Previously, the entire clip would be de activated, even if only part of it was selected. Arrangement clips can now be moved by dragging the upper half of the clip content area. The mouse cursor changes to a hand to indicate the clip's draggable area, where time selections can also be made via a single-click. Previously, the shortcut could only enable the Arrangement Loop, but not disable it. The file will be inserted either where at the Insert Marker position Arrangement View or in the currently selected empty clip slot Session View.
Automation Implemented a global automation mode. In the Arrangement, the visibility of all automation lanes is now toggled via the Automation Mode button or the "A" key. When the automation lanes are visible, the content lanes are minimized to the height of the clip headers.
Clip fades are now always available in the content lane, if the track is at least three units tall. It is now possible to split and consolidate material in a time selection also when the selection exists in an automation lane. In the Arrangement, this means that MIDI clips can only be created by double-clicking in the content lane.
When moving multiple segments within a time selection, snapping aligns at left or the right of the time selection, depending on which side of the time selection you start dragging. A similar logic is also applied to single segments. Additionally, when hovering near segments the value for the aligned events is now shown.
The automation value at the border of a time selection is also shown, regardless if a breakpoint exists, when hovering in proximity of a segment. While creating an automation breakpoint in a time selection, the time selection disappears, which enables moving the newly-created breakpoint.
When dragging automation breakpoints or segments, they now snap to existing breakpoint times. The "Shift" modifier is no longer required for moving automation segments past existing breakpoints. When the grid is disabled, automation breakpoints now snap to breakpoint times and grid times if they are one pixel away.
For breakpoints grabbed by the mouse, automation values are now displayed when hovering over a breakpoint, or dragging any of the following: an automation segment, a time selection automation segment, or multiple breakpoints in a time selection.
It is now possible to move automation segments horizontally. When breakpoints are created close to a grid line, they now automatically snap to the grid. A vertical editing helper line now appears when moving breakpoints in the Arrangement View or Detail View. Breakpoints are now quantized when they are moved.
Introduced fade edge handles in the Arrangement, which allow users to change the duration of a fade in via the "Fade In Start Handle" and fade out via the "Fade Out End Handle" without affecting the fade peaks. However, a fade edge cannot move beyond the the fade peak. Holding "ALT" while resizing one track now resizes all tracks in the current view.
Browser It is now possible to display and search for uninstalled Packs within the browser, and install them from there. The Packs sidebar label now shows updates made to Packs. Users can now download and install these updates. After restarting Live, previously downloaded Packs are now ready for installation, and partially-downloaded Packs can now resume downloading unless Live was restarted on a metered internet connection. Colors can be assigned to items via context menu entries, or using the number keys for assigning colors, and 0 to reset.
Multiple colors can be assigned to an item, but no more than three colors will be shown. New labels show all items tagged with their respective color. Improved the behavior when using the "Locate" button to find a missing user folder. Previously, this would trigger a complete re-scan of the new folder, even if the contents were exactly the same as before, and also lose any colors assigned to items in the folder. When previewing samples in the browser, samples less than 2.
Samples longer than 2. The hierarchy of Group Tracks in a Live Set now appears in the browser. This allows dragging the contents of a Group Track into the current Live Set. In the browser's sidebar, it is now possible to rename user folder labels. Files can be dragged and dropped onto the User Library, Current Project and use folder labels directly.
Live now always listens to MIDI input on monitored tracks i. Live plays back the captured loop immediately, ready for you to add more material.
